AMS Neve AudioFile SC/X Скачать руководство пользователя страница 171 | Manualshive

Страница: 171 / 391

AMS Neve AudioFile SC/X Скачать руководство пользователя страница 171

AudioFile SCX user manual

171

Revision

0.91

The COMBINED/SPLIT/OVERLAID SoftKey determines how the waveform is
displayed when BOTH legs are shown. COMBINED shows one leg above the
centre line and one leg below. SPLIT shows two separate waveforms in parallel,
one for each leg. OVERLAID shows one leg superimposed over the other and
the leg that is on top is selected in the main Display Defaults.

Source Stack Home and End

This is used to go to the top or bottom of the Source Stack.

o jump to the first Cue in the Source Stack

E/END SoftKey to HOME.

oggle the HOME/END SoftKey to END.

T

Toggle the HOM

To jump to the last Cue in the Source Stack.

T

Strip Silence

This will activate the Strip Silence function on the currently selected Cue (shown

er silence. This allows easy

ack-laying of the required audio segments using the nudge keys, and the marks

splay.

en the Strip Silence operation will start. The Strip Silence settings can also be

is

the Strip Silence Confirmation option is set to Yes then the Strip Silence

ettings will be displayed.

in the Source Window).

Strip silence works by placing marks before and aft
tr
can be seen to correspond to the waveform di

Strip silence operates as a background task, indicated by flashing of the green
SoftLED next to the software version number.

To use Strip Silence in Source

Press the EXP ACCESS HardKey.

Press the STRIP SILENCE SoftKey.

If the Strip Silence Confirmation option in Threshold Defaults (page :) is set to No
th
changed in Cut and Splice Local Defaults (page :) before STRIP SILENCE
pressed.

If
s

Jan 2008

«
...
169
170
171
172
173
...
»

Содержание AudioFile SC/X








































































































































































































































































































































































































Отзывы:

Нет отзывов