AMS Neve AudioFile SC/X, Руководство пользователя

Страница: 272 / 391

AudioFile SCX user manual
272
Revision 0.91
General Parameters
number the gentler the action of the stop command.
Distance to target in locate/chase above which unlaced or high speed wind
will be engaged.
ill unlace and fast wind until the difference is within the relace time. Setting
ite” unlace time to be adopted. This will
ermit devices capable of instant locates to avoid entering shuttle or wind
ow which laced or shuttle wind will be
engaged.
This parameter is essentially the opposite of the above and operates if
“unlaced wind” has been engaged. When spooling to a locate time shuttle
mode is engaged when the difference between the current position and the
locate target is below this value.
Play into park time
Allowed overshoot in a locate operation before new locate command is
issued.
When locating, the machine may overshoot the specified location. If the
overshoot becomes greater than the value specified in this default the MCS
will issue a new locate command rather than allowing the machine to park at
the “overshot” position. This is primarily used to cater for devices which have
a built in “play into park” mode (for example Tascam DA60).
No chase stop (0 disabled, 1 enabled)
1 = Don’t issue stop command when parked next to master.
this option is enabled then this machine will be set to shuttle at zero speed
top command (0 or 1)
= Shuttle at zero speed and 1 = STOP command.
Shuttle Stop
Non-zero means that machine will be slowed down to stop. The larger the
Unlace time (seconds)
When the “locate to” or chase difference is greater than this time the machine
w
this value to 255 will cause “infin
p
modes.
Relace time (seconds)
Distance to target in locate/chase bel
If
when it is parked next to the master position.
S
0
Jan 2008