Altera Cyclone V Скачать руководство пользователя страница 214 | Manualshive

Страница: 214 / 1077

Altera Cyclone V Скачать руководство пользователя страница 214

Changes

Version

Date

• Moved all links to the Related Information section of respective topics

for easy reference.

• Added link to the known document issues in the Knowledge Base.
• Added the supported minimum operating frequencies for the supported

memory interface standards.

• Added packages and updated the DQ/DQS groups of Cyclone V E, GX,

GT, and SX devices.

• Added the number of MPFE command, write-data, and read-data ports

for each Cyclone V E, GX, and GT device.

• Added a note about the usable hard memory controller pin assignments

for the F484 package of the Cyclone V E A9, GX C9, and GT D9 devices.

• Updated the M386 package to M383.
• Removed the F672 package from the Cyclone V E A5 device in the table

listing Cyclone V E hard memory controller widths.

• Added the U484 package for the Cyclone V GX C9 device in the table

listing Cyclone V GX hard memory controller widths.

• Updated the hard memory controller widths of Cyclone V E, GX, SX,

and ST.

• Removed the restrictions on using the bottom hard memory controller

of the Cyclone V GX C5 device if the configuration is 3.3/3.0 V.

• Added note to clarify that the DQS phase-shift circuitry figures show

all possible connections and the device pin-out files have per package
information.

2013.05.06

May 2013

• Reorganized content and updated template.

2012.11.28

December 2012

• Added a list of supported external memory interface standards using

the hard memory controller and soft memory controller.

• Added performance information for external memory interfaces and

the HPS external memory interfaces.

• Separated the DQ/DQS groups tables into separate topics for each device

variant for easy reference.

• Updated the DQ/DQS numbers and device packages for the Cyclone V

E, GX, GT, SX, and ST variants.

• Moved the PHYCLK networks pin placement guideline to the

Pin and FPGA Resources

chapter of the

External Memory Interface

Handbook

.

• Moved information from the "Design Considerations" section into

relevant topics.

• Removed the "DDR2 SDRAM Interface" and "DDR3 SDRAM DIMM"

sections. Refer to the relevant sections in the

External Memory Interface

for the information.

• Added the I/O and DQS configuration blocks topic.
• Updated the term "Multiport logic" to "multi-port front end" (MPFE).
• Added information about the hard memory controller interface widths

for the Cyclone V E, GX, GT, SX, and ST variants.

External Memory Interfaces in Cyclone V Devices

Altera Corporation

Send Feedback

CV-52006

Document Revision History

6-40

2014.01.10

«
...
212
213
214
215
216
...
»

Содержание Cyclone V






















































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов