Agilent Technologies 4339B, Руководство по эксплуатации

Страница: 276 / 287

GPIB Errors 4339B
34 HIGH OFFSET LEAKA GE
When the calibration or the oset-error canceling is performed, the oset-error is too high.
Contact your nearest Agilent T echnologies oce .
35 FIXTURE UNKNO WN
An unknown test xture or test leads is connected to the Interlock connector; for example ,
when you connect the 16117C T est Leads to the 4339B, the wiring of the interlock cable is
mistaken.
36 INTERLOCK OPEN
Nothing is connected to the Interlock connector or the test xture's cover is opened.
GPIB Errors
-100 Command error
This is a generic syntax error that the 4339B cannot detect more specic errors . This code
indicates only that a command error , as dened in IEEE 488.2, 11.5.1.1.4, has occurred.
-101 Invalid character
A syntax element contains a character which is invalid for that type; for example , a header
containing an ampersand, SENSE& .
-102 Syntax error
An unrecognized command or data type was encountered; for example , a string was received
when the 4339B was not expecting to receive a string.
-103 Invalid separator
The syntax analyzer was expecting a separator and encountered an illegal character; for
example , the semicolon was omitted after a program message unit, *RST:TRIG .
-104 Data type error
The syntax analyzer recognized an unallowed data element; for example , numeric or string data
was expected but block data was encountered.
-105 GET not allowed
A Group Execute Trigger (GET) was received within a program message (see IEEE 488.2, 7.7).
-108 P arameter not allowed
More parameters were received than expected for the header; for example , the
[:SENSe]:AVERage:COUNt command only accepts one parameter , so receiving :AVER:COUN 2,4
is not allowed.
Messages-4