Yamaha YZ125(P)/LC, Owner'S Service Manual

Page: 300 / 564

4-44
ENG
KICK AXLE, SHIFT SHAFT AND PRIMARY DRIVE
GEAR
4. Hook:
9
Torsion spring
1
NOTE:
Turn the torsion spring clockwise and hook into
the proper hole
a
in the crankcase.
EC4C5402
Kick idle gear
1. Install:
9
Circlip
1
9
Kick idle gear
2
9
Plain washer
3
NOTE:
9
Apply the transmission oil on the kick idle gear
inner circumference.
9
Install the kick idle gear with its depressed side
a
toward you.
EC4C5503
Primary drive gear
1. Install:
9
Spacer
1
9
Primary drive gear
2
9
Bolt
3
NOTE:
Temporarily tighten the bolt at this point.
2. Install:
9
Primary driven gear
Refer to “CLUTCH AND PRIMARY DRI-
VEN GEAR” section.
3. Tighten:
9
Bolt (primary drive gear)
1
NOTE:
Place an aluminum plate
a
between the teeth of
the primary drive gear
2
and driven gear
3
.
4. Install:
9
Dowel pin
1
9
Gasket [crankcase cover (right)]
2
55 Nm (5.5 m•kg, 40 ft•lb)
5NY-9-30-4C 5/23/01 8:56 PM Page 14