SPEC
2 - 2
GENERAL SPECIFICATIONS
Oil capacity:
Engine oil
Periodic oil change
1.0 L (0.88 Imp qt, 1.06 US qt)
Total amount
1.2 L (1.06 Imp qt, 1.27 US qt)
Air filter:
Wet type element
Fuel:
Type
Unleaded gasoline only (USA, AUS, NZ)
Regular unleaded gasoline only
(CDN, EUROPE)
Regular gasoline (ZA)
Tank capacity
6.6 L (1.45 Imp gal, 1.74 US gal)
Reserve amount
1.9 L (0.42 Imp gal, 0.5 US gal)
Carburetor:
Type
VM20SS
Manufacturer
MIKUNI
Spark plug:
Type
CR7HSA/U22FSR-U
Manufacturer
NGK/DENSO
Gap
0.6 ~ 0.7 mm (0.02 ~ 0.03 in)
Clutch type:
Wet, multiple-disc
Transmission:
Primary reduction system
Gear
Primary reduction ratio
68/19 (3.579)
Secondary reduction system
Chain drive
Secondary reduction ratio
49/13 (3.769)
Transmission type
Constant mesh, 5-speed
Operation
Left foot operation
Gear ratio:
1st
37/14 (2.643)
2nd
32/18 (1.778)
3rd
25/19 (1.316)
4th
23/22 (1.045)
5th
21/24 (0.875)
Chassis:
Frame type
Diamond
Caster angle
28.7˚
Trail
93 mm (3.66 in)
Tire:
Type
With tube
Size (front)
70/100-17 40M
Size (rear)
90/100-14 49M
Manufacturer (front and rear)
CHENG SHIN
Tire pressure (front and rear)
100 kPa (1.00 kgf/cm
2
, 15 psi)
2
Summary of Contents for TT-R125E(R)
