Yamaha TT-R125E(R), Owner'S Service Manual

Page: 530 / 578

5 - 63
CHAS
NOTES ON DISPOSAL (YAMAHA DEALERS
ONLY)
Gas pressure must be released before dispos-
ing of a rear shock absorber and gas cylinder.
TT-R125E
To release the gas pressure, drill a 2 ~ 3-mm
(0.08 ~ 0.12-in) hole through the gas cylinder
at a point
a
from its end as shown.
WARNING
Wear eye protection to prevent eye damage
from released gas or metal chips.
TT-R125LWE
To release the gas pressure, press on the gas
valve needle with a suitable tool as shown,
until all of the gas is released (the hissing has
stopped).
Å
TT-R125E
ı
TT-R125LWE
Å
ı
EC583000
REMOVAL POINTS
Bushing
1. Remove:
●
Bushing 1
NOTE:
Remove the bushing by pressing.
EC584000
INSPECTION
Rear shock absorber assembly
1. Inspect:
●
Damper rod 1
Bends/damage
→
Replace rear shock
absorber assembly.
●
Shock absorber 2
Oil leaks
→
Replace rear shock
absorber assembly.
Gas leaks
→
Replace rear shock
absorber assembly.
●
Spring 3
Damage
→
Replace rear shock
absorber assembly.
Fatigue
→
Replace rear shock
absorber assembly.
Move spring up and down.
REAR SHOCK ABSORBER ASSEMBLY