
3 - 9
INSP
ADJ
ENGINE OIL REPLACEMENT
5. Install:
●
Dipstick
6. Start the engine and let it warm up for
several minutes.
7. Turn off the engine and inspect the oil
level once again.
NOTE:
Wait a few minutes until the oil settles before
inspecting the oil level.
ENGINE OIL REPLACEMENT
1. Start the engine and warm it up for sev-
eral minutes and wait for five minute.
2. Place the machine on a level place and
hold it on upright position by placing the
suitable stand under the engine.
3. Place a suitable container under the
engine.
4. Remove:
●
Oil drain bolt
1
●
Dipstick
2
Drain the engine oil.
5. Install:
●
Copper washer
●
Oil drain bolt
1
New
T
R
.
.
20 Nm (2.0 m · kg, 14 ft · lb)
6. Fill:
●
Engine oil
7. Check:
●
Oil leakage
8. Check:
●
Engine oil level
9. Install:
●
Dipstick
2
Oil capacity:
Periodic oil change:
1.0 L (0.88 Imp qt, 1.06 US qt)
Summary of Contents for TT-R125E(R)
