Yamaha TT-R125E(R), Owner'S Service Manual

Page: 216 / 578

3 - 27
INSP
ADJ
TIRE PRESSURE CHECK/SPOKES INSPECTION AND
TIGHTENING/WHEEL INSPECTION
EC36Q000
TIRE PRESSURE CHECK
1. Measure:
●
Tire pressure
Out of specification
→
Adjust.
NOTE:
●
Check the tire while it is cold.
●
Loose bead stoppers allow the tire to slip off
its position on the rim when the tire pressure
is low.
●
A tilted tire valve stem indicates that the tire
slips off its position on the rim.
●
If the tire valve stem is found tilted, the tire is
considered to be slipping off its position. Cor-
rect the tire position.
Standard tire pressure:
100 kPa (1.00 kgf/cm
2
, 15 psi)
SPOKES INSPECTION AND TIGHTENING
1. Inspect:
●
Spokes 1
Bend/damage
→
Replace.
Loose spoke
→
Retighten.
2. Tighten:
●
Spokes
NOTE:
Be sure to retighten these spokes before and
after break-in. After a practice check spokes
for looseness.
T
R
.
.
Front 2 Nm (0.2 m · kg, 1.4 ft · lb)
Rear 3 Nm (0.3 m · kg, 2.2 ft · lb)
EC36T000
WHEEL INSPECTION
1. Inspect:
●
Wheel runout
Elevate the wheel and turn it.
Abnormal runout
→
Replace.