Yamaha TT-R125E(R), Owner'S Service Manual

Page: 194 / 578

3 - 16
INSP
ADJ
3. Install:
●
Diaphragm
●
Brake master cylinder cap
NOTE:
If bleeding is difficult, it may be necessary to
let the brake fluid system stabilize for a few
hours. Repeat the bleeding procedure when
the tiny bubbles in the system have disap-
peared.
j. Add brake fluid to the level line on the
reservoir.
WARNING
Check the operation of the brake after
bleeding the brake system.
FRONT BRAKE ADJUSTMENT
TT-R125E
1. Check:
●
Brake lever free play
a
Out of specification
→
Adjust.
2. Adjust:
●
Brake lever free play
NOTE:
For minute adjustment, loosen the locknut 2
on the lever side and adjust with the adjuster
3 .
CAUTION:
Make sure that there is no brake drag after
adjusting the brake lever free play.
Brake lever free play
a
:
10 ~ 15 mm (0.39 ~ 0.59 in)
Brake lever free play adjustment steps:
●
Loosen the locknuts 1 .
●
Turn the locknuts until free play
a
is
within the specified limits by changing their
tightening position.
●
Tighten the locknuts.
FRONT BRAKE ADJUSTMENT