Yamaha FX Nytro FX10X, Service Manual

Page: 740 / 859

8-36
– +
ELEC
SIGNAL SYSTEM
SPEED SENSOR
1. Inspect:
• Speed sensor
Inspection steps:
• Connect the pocket tester (DC 20 V) to the
speed sensor coupler (wire harness side) as
shown.
• Elevate the track and slowly rotate it.
• Measure the voltage (DC 5 V) of white and
black/blue. With each full rotation of the track
the voltage reading should cycle from 0.6 V to
4.8 V to 0.6 V to 4.8 V.
Out of specification
→
Replace.
Positive tester probe
→
White
Negative tester probe
→
Black/Blue
Positive battery terminal
→
Blue
Negative battery terminal
→
Black/Blue