background image

 

780 Professional Drive N Shreveport, LA 71105 Phone (318)524-2270 

Arctic Cat Wild Cat Upper Radius Bars 

Read before Installation 

This  product  is  designed  for  use  on  ATVs  and/or  RUVs  to  increase  ground  clearance  and  fender  clearance.    Purchasers 

should be aware that use of this product may increase the frequency of required maintenance, part wear, and will raise the 

center of gravity on your ATV and/or RUV, increasing risk of roll-over, injury and death on all types of terrain.  It is your 

responsibility to always inform other operators and passengers of this vehicle about the added risks. 
 

High Lifter Products, products are designed to best fit users ATV/RUV under stock conditions.  Adding, modifying, or 

fabricating any OEM or aftermarket parts will void warranty.  High Lifter Products, products could interfere with other 

aftermarket accessories.  If the user has aftermarket products on machine, contact High Lifter Products to verify that they will 

work together.  Adding aftermarket suspension components and/or more aggressive tires can cause breakage of other OEM 

driveline components such as differentials, axles or drive shafts. 

 

We recommend that wider tires and/or wheel spacers be used to achieve a wider stance and to improve stability of the ATV 
and/or RUV.  Riders should be advised that the handling characteristics of a taller ATV and/or RUV are different and require 

extra care when riding, particularly on side hills or off-camber situations.  If you further raise the center of gravity by adding 

taller tires, heavy loads to racks or seats, or by any other means, the ATV and/or RUV must be operated with even more care, 

at slower speeds and on relatively flat ground.  All turns should be done at a slow speed, even on level ground. 

 

Operation of an ATV and/or RUV with or without modified suspension components, while or shortly after consuming 

alcohol or drugs, subjects the rider to the risk of serious bodily harm or possible death.  This risk is compounded if the rider 

does not wear an approved helmet and other safety gear.  High Lifter urges that all approved safety gear be worn when riding 
an ATV and/or RUV as a driver or passenger. 

 

By purchasing and installing High Lifter Products, products, user agrees that should damages occur, High Lifter Products will 

not be held responsible for loss of time, use, labor fees, replacement parts, or freight charges.  High Lifter Products will not be 

held responsible for any direct, indirect, incidental, special, or consequential damages that result from any product purchased 

from High Lifter Products.  The total liability of seller to user for all damages, losses, and causes of action, shall not exceed the 

total purchase price paid for the product that gives rise to the claim.     

 
If this product is not what you expected, or is not consistent with your intended use, you should return the product 

immediately to the seller, before installation, for a refund of the purchase price; less any fees.  After installation, product is 

warranted for 90 days for defects in workmanship and materials.  High Lifter Products will warranty only parts provided by 

High Lifter Products.  Any damage or problems with OEM housings, bearings, seals, or other manufacturer’s products will 

not be covered by High Lifter Products.  Parts and products will not be warranted if item was not installed properly, misused, 

or modified. 

 

Dealers and other Installers 
You are responsible for informing your customer and end user of the information contained above and the increased potential 

hazards of operating an ATV and/or RUV equipped with modified suspension components.  If you install any suspension 

modifying components, it is your responsibility to also install the warning label prominently in view of the driver and in 

prominent view of the driver and passenger on RUVs and multi-passenger ATVs.  They should also be instructed to notify 

anyone operating the vehicle, as well as any passengers, that said vehicle is modified. 

 

As discussed above, it is critically important that they be instructed in the need for slower speed operation, regardless of 

terrain, after this lift kit is installed. 

 

Summary of Contents for Arctic Cat Wild Cat Upper Radius Bars







Reviews: