Yamaha FX Nytro FX10X, Service Manual

Page: 118 / 859

2-39
INSP
ADJ
3. Adjust:
• Track deflection
Adjustment steps:
a. Place the snowmobile onto a suitable stand to
raise the track off of the ground.
b. Loosen the rear axle nut 1 .
c. Start the engine and rotate the track once or
twice. Stop the engine.
d. Check the track alignment with the slide runner
2 . If the alignment is incorrect, turn the left and
right adjusters to adjust.
5 Slide runner
6
Track
7 Track metal
a
Gap
Ê
Forward
e. Adjust the track deflection until the specified
amount is obtained.
CAUTION:
The adjusters should be turned an equal
amount.
f. Recheck the alignment and deflection. If neces-
sary, repeat steps (c) to (e) until the specified
amount is obtained.
g. Tighten the rear axle nut.
Track alignment
È
Shifted to
right
É
Shifted to
left
3
Left adjuster Turn out Turn in
4
Right adjuster Turn in Turn out
Track deflection
More than
specified
Less than
specified
3
Left adjuster Turn in Turn out
4
Right adjuster Turn in Turn out
T
R
.
.
Rear axle nut:
75 Nm (7.5 m · kg, 54 ft · lb)
È É
TRACK TENSION ADJUSTMENT