Yamaha FX Nytro FX10X, Service Manual

Page: 775 / 859

9-18
SPEC
MAINTENANCE SPECIFICATIONS
ELECTRICAL
Model
FX10/FX10RT/FX10RTR/FX10RTRA/FX10MT/FX10MTR/
FX10MTRA
Voltage 12 V
Ignition system:
Ignition timing (B.T.D.C.) 5.0° at 1,500 r/min
Advanced type Digital type
Ignition coil:
Model/Manufacturer F6T558/MITSUBISHI
Ignition spark gap 6.0 mm (0.24 in)
Primary coil resistance 1.19 ~ 1.61
Ω
at 20 °C (68 °F)
Secondary coil resistance 8.5 ~ 11.5 k
Ω
at 20 °C (68 °F)
Charging system:
Type AC magneto
Nominal output 14 V/less than 35 A at 5,000 r/min
DC-T.C.I.:
Magneto model/Manufacturer F074T39771/MITSUBISHI
Standard 14 V 32.8 A, 460 W at 5,000 r/min
Stator coil resistance (color code) 0.22 ~ 0.26
Ω
at 20 °C (68 °F) (White – White)
ECU model/Manufacturer F8T84071/MITSUBISHI (FX10/FX10RT/FX10RTR/
FX10RTRA)
F8T84073/MITSUBISHI (FX10MT/FX10MTR/FX10MTRA)
Rectifier/regulator:
Type Short circuit type
Model/Manufacturer FH012AA/SHINDENGEN
No load regulated voltage (DC) 14.2 ~ 14.8 V
Capacity (DC) 50.0 A
Withstand voltage 40.0 V
Battery:
Manufacturer YUASA
Model YTX20L-BS
Voltage, capacity 12 V, 18.0 Ah
Ten hour rate amperage 1.8 A
Electric starter system:
Type Constant mesh type
Starter motor:
Model/Manufacturer 8GL/YAMAHA
Output 0.95 kW
Armature coil resistance
Continuity check 0.0081 ~ 0.0099
Ω
at 20 °C (68 °F)
Insulation check Above 1 M
Ω
at 20 °C (68 °F)
Brush
Overall length 9.8 mm (0.39 in)
<Wear limit> 4.4 mm (0.17 in)
Spring pressure 7.36 ~ 11.04 N (750 ~ 1,126 g, 26.49 ~ 39.74 oz)
Commutator diameter 28.0 mm (1.10 in)
<Wear limit> 27.0 mm (1.06 in)
Mica undercut 1.0 mm (0.04 in)
Starter relay:
Model/Manufacturer MS5F-571/JIDECO
Amperage rating 180 A
Coil resistance 4.18 ~ 4.62
Ω
at 20 °C (68 °F)