Yamaha FX Nytro FX10X, Service Manual

Page: 106 / 859

2-33
INSP
ADJ
PARKING BRAKE ADJUSTMENT/
BRAKE FLUID LEVEL INSPECTION
4. Measure:
• Brake pad clearance (
a
+
b
)
Out of specification
→
Adjust.
5. Adjust:
• Brake pad clearance
Adjustment steps:
• Loosen the locknut
1
.
• Turn the adjusting bolt 2 in or out until the
specified clearance between the parking brake
pad
3 and brake disc 4 is obtained.
• Tighten the locknut.
Brake pad clearance (
a
+
b
):
1.5 ~ 2.0 mm (0.059 ~ 0.079 in)
T
R
.
.
Parking brake adjusting locknut:
15 Nm (1.5 m · kg, 1.1 ft · lb)
BRAKE FLUID LEVEL INSPECTION
1. Place the snowmobile on a level surface.
2. Check:
• Fluid level
Fluid level is under the lower level line
a
→
Fill to the proper level.
NOTE:
For a correct reading of the brake fluid level, make
sure that the top of the handlebar brake master cyl-
inder reservoir is horizontal.
CAUTION:
Brake fluid may corrode painted surfaces or
plastic parts. Always clean up spilled fluid
immediately.
Recommended brake fluid:
DOT 4