Yamaha FX Nytro FX10X, Service Manual

Page: 390 / 859

5-4
ENG
SEAT AND FUEL TANK
INSTALLATION
1. Install:
• Fuel pump gasket
• Fuel pump
• Fuel pump bracket
NOTE:
• Do not damage the installation surface of the fuel
tank when installing the fuel pump.
• Always use a new fuel pump gasket.
• Install the fuel pump in the direction shown in the
illustration.
• Install the fuel pump bracket by aligning the pro-
jection
a
on the fuel pump with the projection
b
on the fuel tank.
• Tighten the bolts in stages and in a crisscross
pattern.
T
R
.
.
Fuel pump nut:
7 Nm (0.7 m · kg, 5.1 ft · lb)
New
2. Install:
• Fuel hose
CAUTION:
When installing the fuel hose, make sure that it
is securely connected, and that the fuel hose
connector cover on the fuel hose is in the cor-
rect position, otherwise the fuel hose will not be
properly installed.
NOTE:
Install the fuel hose connector cover 1 securely
onto the fuel pump until a distinct “click” is heard.
3. Install:
• Fuel hose connector holder 1
CAUTION:
When installing the fuel hose, make sure that it
is securely connected, and that the fuel hose
connector holder is in the correct position, oth-
erwise the fuel hose will not be properly
installed.
NOTE:
Install the fuel hose connector holder 1 securely
onto the fuel tank until a distinct “click” is heard, and
then make sure that it does not come loose.