Xerox Phaser 8860, Service Manual

Page: 31 / 316

09/2007
1-5 Phaser 8860/8860MFP Service Manual
Routine Maintenance Activities, Cleaning Proce-
Service Call Procedures Initial Issue
Routine Maintenance Activities
Procedure
1. Clean the Pick Rollers on every call.
2. Use the Control Panel to check maintenance item counters.
3. Compare the counter values to those listed in Table 1 .
4. Advise the customer of any routine maintenance items that are approaching or over the
service limit.
Cleaning Procedures
Purpose
The purpose is to provide cleaning procedures to be performed at every call.
Procedure
CAUTION
Do not use any solvents unless directed to do so in this manual.
General Cleaning
Use a dry lint free cloth or a lint free cloth moistened with water for all cleaning unless directed
otherwise in this manual. Wipe with a dry, lint free cloth if a moistened cloth is used.
1. Feed Components (Rolls and Pads)
Follow the General Cleaning procedure above.
2. Jam Sensors
Clean the sensors with a dry cotton swab.
3. Scanner
a. Using the optical Cleaning Cloth, clean the Document Glass.
b. Clean the Document Cover.
4. DADF
Check the paper path for debris or damage. Clean the rolls with a clean cloth and Film
Remover as required.
Table 1 Routine Maintenance Item Life Expectancy
Routine Maintenance Items
Extended-Capacity Maintenance Kit 30,000 cycles (0-20% coverage)
20,000 cycles (20-100%) coverage.
Standard-Capacity Maintenance Kit 10,000 cycles
Waste Tray Empty every 7 Purges
DADF Pick Rollers and Separator Pad 50,000 scans