09/2007
4-71
Phaser 8860/8860MFP Service Manual
REP 6.0.2
Repairs and Adjustments
Initial Issue
REP 6.0.2 Front Door and Exit Door Interlock Switches
Parts List on
PL 6.0
Removal
NOTE:
These steps describe Interlock Switch removal for the 8860MFP. On 8860 models,
access the switches by removing the Control Panel (
REP 1.1.6
). Afterwards, return to this pro-
cedure and begin at Step 3.
The same part is used for both the Front Door and Exit Door Interlocks, Use this procedure to
replace either interlock switch.
NOTE:
Replacement of the Front Door Interlock Switch does not require removal of the Outer
Duplex Guide
1.
Remove the Scanner Assembly with attached DADF (
REP 1.0.11
).
2.
Remove the Output Tray (
REP 1.0.6
).
NOTE:
Removal of the Outer Duplex Guide is not required to replace the Front Door Inter-
lock Switch.
3.
Remove the Outer Duplex Guide (
REP 3.0.6
).
4.
Remove the defective switch from the Outer Duplex Guide.
Figure 1 Removing the Front Door Interlock Switch
Figure 2 Removing the Exit Door Interlock Switch
Summary of Contents for Phaser 8860
