![background image](http://html2.mh-extra.com/html/xerox/phaser-8860/phaser-8860_service-manual_3590364181.webp)
09/2007
4-57
Phaser 8860/8860MFP Service Manual
REP 4.0.12, REP 4.0.13
Repairs and Adjustments
Initial Issue
REP 4.0.12 Tray 1 Pick Solenoid
Parts List on
PL 4.0
Removal
NOTE:
These steps describe Tray 1 Pick Solenoid removal for the 8860MFP. On 8860 models,
access the Tray 1 Pick Solenoid by removing the Control Panel Cover (
REP 1.1.5
). Afterwards,
return to this procedure and begin at Step 3.
1.
Remove the Scanner Assembly with attached DADF (
REP 1.0.11
).
2.
Remove the Output Tray (
REP 1.0.6
).
3.
Remove the Left Side Cover (
REP 1.0.7
or
REP 1.1.9
for the 8860).
4.
Disconnect the solenoid (
P/J241
) from the harness.
5.
Remove 1 (plastic, T-20) screw that secures the solenoid to the Media Drive Assembly.
Figure 1 Removing the Tray 1 Pick Solenoid
Replacement
Align the hole in the solenoid with the boss on the Media Drive Assembly before tightening the
screw.
REP 4.0.13 Tray 2 Lift Motor
Parts List on
PL 4.0
Removal
1.
Remove the Electronics Module (
REP 5.0.5
).
2.
Remove Tray 2.
3.
Remove the Lift Motor Gear by prying the Push Nut off the shaft. Replace the Push Nut
with a new one when installing the gear.
Figure 1 Removing the Lift Motor Gear
4.
Disconnect the Tray 2 Lift Motor (
P/J203
) from the harness.
5.
Remove 2 screws that secure the Tray Lift Motor to the chassis, and remove the motor.
Summary of Contents for Phaser 8860
