09/2007
4-46
Phaser 8860/8860MFP Service Manual
REP 3.0.6, REP 3.0.7
Initial Issue
Repairs and Adjustments
REP 3.0.6 Outer Duplex Guide
Parts List on
PL 3.0
Removal
NOTE:
These steps describe Outer Duplex Guide removal for the 8860MFP. On 8860 models,
access the Outer Duplex Guide by removing the Control Panel (
REP 1.1.6
). Afterwards, return
to this procedure and begin at Step 2.
1.
Remove the Output Tray (
REP 1.0.6
).
2.
Remove the Left Side Cover (
REP 1.0.7
or
REP 1.1.9
for the 8860).
3.
Remove the Right Side Cover (
REP 1.0.21
or
REP 1.1.10
for the 8860).
4.
Disconnect the Front Door
P/J140
and Exit Door
P/J411
Interlock Switches on the
8860MFP and remove the guide. For 8860 models, these connections are made on the
Control Panel (
Figure 12
).
5.
Remove the 4 (plastic, T-20) screws that secure the Outer Duplex Guide.
Figure 1 Removing the Outer Duplex Guide
REP 3.0.7 Exit Module (8860MFP)
Parts List on
PL 3.0
Removal
1.
Remove the Scanner Assembly with attached DADF (
REP 1.0.11
).
2.
Remove the Output Tray (
REP 1.0.6
).
3.
Remove the Left Side Cover (
REP 1.0.7
).
4.
Remove the Right Side Cover (
REP 1.0.21
).
5.
Remove the Ink Loader (
REP 2.0.1
).
6.
Remove these components from the right side:
a.
Remove the right front (plastic, T-20) screw.
b.
Remove the KL-Clip, Pulley, and Belt from the Exit Elevator Roller to access and
remove the right rear screw located behind the large Wiper Assembly gear.
Figure 1 Exit Module Right Side Fasteners
Summary of Contents for Phaser 8860
