09/2007
4-73
Phaser 8860/8860MFP Service Manual
REP 6.0.6, REP 6.0.7
Repairs and Adjustments
Initial Issue
Figure 2 Removing the Waste Tray Cover
8.
Disconnect the Waste Tray Detect Sensor (
P/J110
) from the I/O Board.
9.
Unlace the sensor harness from the retainers and guides.
10. Release the hooks that secure the sensor to the cover and remove the sensor.
Figure 3 Removing the Waste Tray Detect Sensor.
Replacement
Perform the Head Tilt Gear (
ADJ 4.13.1
), and Process Drive Alignment (
ADJ 4.7.1
) adjust-
ments before restoring system power.
REP 6.0.7 Paper Size Switch
Parts List on
PL 6.0
Removal
NOTE:
These steps describe Paper Size Switch removal for the 8860MFP. On 8860 models,
access the switch by removing the Control Panel Cover (
REP 1.1.5
). Afterwards, return to this
procedure and begin at Step 3.
1.
Remove the Scanner Assembly with attached DADF (
REP 1.0.11
).
2.
Remove the Output Tray (
REP 1.0.6
).
3.
Remove the Right Side Cover (
REP 1.0.21
or
REP 1.1.10
on the 8860).
4.
Remove Tray 2.
5.
Disconnect the Paper Size Switch (
P/J600
) from the I/O Board.
6.
Unlace the harness from the retainers.
7.
Use pliers to push the latch rearward and release the front of the switch from the chassis.
Summary of Contents for Phaser 8860
