Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 54 / 503

Phaser 5400 Laser Printer Service Guide 25
Unacceptable Media
The following media are unacceptable for use in the printer. Their use may cause high
rates of jamming and other paper-handling problems:
■
Excessively thick or thin paper
■
Heavily textured paper
■
Paper that has already been printed on (pre-printed Letterhead is allowed)
■
Wrinkled, torn, or bent paper
■
Moist or wet paper
■
Curled paper
■
Paper with an electrostatic charge
■
Glued paper
■
Paper with special coating
■
Paper unable to withstand a temperature of 150° C
(302° F)
■
Thermal paper
■
Carbon paper
■
Paper with paper fasteners, ribbons, staples, tape, etc. attached
■
Label stock with exposed backing sheet
Printing Accuracy
Table 14 Printing Accuracy
Item Accuracy Measuring
Conditions
Registration Lead Edge 2.0 mm
Side Edge 2.5 mm
Skew 2.0 mm At a distance of 245 mm
Orthogonality 1.3 mm At a distance of 195 mm
Linearity
In direction of paper travel 1.0 mm For 390 mm straight line
At right angle of direction of
paper travel 0.7 mm For 245 mm Straight line
At 40 degree angle to
direction of paper travel 1.5 mm For 347 mm straight line
Parallelism 2.0 mm Over 390 mm straight
lines
Magnification
In direction of paper travel 100 0.8% At a distance of 390 mm
At right angle to direction of
paper travel 100 0.5% At a distance of 245 mm