Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 239 / 503

210 Phaser 5400 Laser Printer Service Guide
RAP 83 Damaged Print
The printed page comes out of the printer either
wrinkled, creased, or torn.
Figure 31 Damaged Print
Table 114 Damaged Print Troubleshooting Procedure
Step Actions and Questions Yes No
1 INITIAL ACTIONS
■
Check that the paper supply is dry and fresh.
■
Check that rollers and other components in the paper
path are clean and unobstructed.
■
Ensure that the paper is within specification.
2 OBSERVE PAPER FEED
Observe paper feed as you run a Test Print.
Is the paper fed crooked?
Go to
RAP 82,
page 204
Go to Step 3.
3 PAPER REPLACEMENT
1. Replace paper with fresh, dry standard paper.
2. Run a Test Print.
Is the paper still damaged?
Go to
Step 4. Problem
solved.
4 FUSER INSPECTION
1. Open the Exit Assembly.
Warning: If the printer has been powered ON,
the Fuser will be hot. Use extreme care
when handling the Fuser.
2. Remove the Fuser Assembly.
3. Turn the Fuser Assembly upside down.
4. Rotate the fuser idler gear manually and inspect the
Heat Roller.
5. Turn the Fuser Assembly right side up.
6. Open the fuse jam access cover.
7. Rotate the fuser idler gear manually and inspect the
Pressure Roller.
Are the Heat and Pressure Rollers free of
scratches (damage) and contamination?
Go to
Step 5. Replace the
Fuser
Assembly
[RRP 5.1,
page 288 ].