Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 261 / 503

232 Phaser 5400 Laser Printer Service Guide
Note: Each increment of change equals approximately one-half
millimeter. In the scan direction increasing the value moves
the image to the right and decreasing the value moves the
image to the left. In the process direction increasing the
value moves the image toward the trail edge and decreasing
the value moves the image towards the lead edge.
6. Press [4] to save the setting.
7. Press [1] or [5] to scroll to “Test Print.”
8. Press [2] or [6] to scroll “Print Pattern” and press [4]. The printer begins printing
test pages with the print pattern seen in the figure below.
9. Measure the distance from the left edge of the paper to the left edge of the image
and measure the distance from the right edge of the paper to the right edge of the
image. These two measurements should be equal.
10. Measure the distance from the lead edge of the paper to the lead edge of the image
and measure the distance from the trail edge of the paper to the trail edge of the
image. These two measurements should be equal.
11. Repeat steps 1 through 10 until equal side-to-side and lead edge to trail edge
measurements are achieved.
Figure 35 Registration Test Pattern