Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 266 / 503

Phaser 5400 Laser Printer Service Guide 237
Detack Saw 5 min. 1. Press [4] to start test.
2. Detack Saw is electrically charged for
duration.
3. Press [0] to stop.
Fan Motor High 5 min. 1. Press [4] to start test.
2. Operates the Fan Motor at high speed
for duration.
3. Press [0] to stop.
Dup Motor On Low 5 min. 1. Press [4] to start test.
2. Operates the Duplex Motor at low
speed for duration.
3. Press [0] to stop.
Dup Motor On Hi 5 min. 1. Press [4] to start test.
2. Operates the Duplex Motor at high
speed for duration.
3. Press [0] to stop.
Exit Motor Fwd L 5 min. 1. Press [4] to start test.
2. Operates the Exit Motor Forward at
low speed or Press [0] to stop.
Exit Motor Rev L 5 min. 1. Press [4] to start test.
2. Operates the Exit Motor Reverse at
low speed or Press [0] to stop.
Exit Motor Rev H 5 min. 1. Press [4] to start test.
2. Operates the Exit Motor Reverse at
high speed.
3. Press [0] to stop.
ROS Motor 5 min. 1. Press [4] to start test.
2. Operates the Laser Scanner Motor for
duration.
3. Press [0] to stop.
Note: Print Cartridge must be
installed to conduct this test.
HCS Motor 5 min. 1. Press [4] to start test.
2. Operates the HCS Motor for duration
or Press [0] to stop.
Exit Gate Sol 2 sec. 1. Press [4] to start test.
2. Actuates the Exit Gate Solenoid for
duration.
Charge Roll AC 5 min. 1. Press [4] to start test.
2. The Charge Roller is AC charged for
duration.
3. Press [0] to stop.
Charge Roll DC 5 min. 1. Press [4] to start test.
2. The Charge Roller is DC charged for
duration.
3. Press [0] to stop.
Table 125 Component Tests (cont'd.)
Press [1] or [5] to display: Main Menu
Component Test
Press [2] or [6]
to display:
⇓
Displayed
Result:
⇓
Turn -On
Duration
Procedure / Comment