Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 246 / 503

Phaser 5400 Laser Printer Service Guide 217
RAP 87 Resolution
The two pixel lines and halftone patches cannot be reproduced clearly on the print.
Table 118 Resolution Troubleshooting Procedure
Step Actions and Questions Yes No
1 INITIAL ACTIONS
■
Check that the print density is set to the default value.
2 PRINT CARTRIDGE REPLACEMENT
1. Install a new Print Cartridge [PL 8.1, page 402 ].
2. From the Ready Menu, press [1] or [5] to scroll to
Menus / Print Menu, then press [2] or [6] to scroll to
Print Menu / Test Print, press [4] to run the
Print-Quality Test Print.
Does the Test Print output resolution appear to
be acceptable?
Problem
solved. Go to
Step 3.
3 SEQUENTIAL REPLACEMENT
Replace as necessary until the defect component is
found, in the following sequence:
■
Laser Assembly [RRP 7.1, page 297
■
HVPS [RRP 8.2, page 307 ]