Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 256 / 503

Phaser 5400 Laser Printer Service Guide 227
System Controller Board Test Print
The “Test Print” is a multi-purpose print displaying a wide
variety of objects including text, multi-positional thin/thick
lines, black painted areas, gray scale, fine alignment
graduations to facilitate checking registration, lead edge and
side edge alignment, etc. Normally, running this test print
delivers two identical pages.
1. From the Ready menu, press [1] or [5] until “Print
Menu” is displayed.
2. Press [2] or [6] until “Test Print” is displayed.
3. Press [4] and the System Controller test page is printed.
Fault History
The fault history is a printed list consisting of two columns. The first column is the
page count when the fault occurred; the second column is the fault or error code,
which may be found in Error Codes and Messages on page 27. If the printer is not
functional and a Fault History cannot be printed, see Display Faults.
1. From the “Ready” menu, press [1] or [5] until “Print Menu” is displayed.
2. Press [2] or [6] until “Display Faults” is displayed.
3. Press [3] to view the most recent fault. Continuing to press [3] will display earlier
faults, in order with page count and fault code.
Note: It is advisable to obtain a list of fault codes for reference
before calling for technical assistance.
Display Faults
Display Faults provides fault history for the case where a page cannot be printed. It is
recommended that you write down the fault history, or at least recent faults that may
be pertinent to resolving a problem.
1. From the “Ready” menu, press [1] or [5] until “Print Menu” is displayed.
2. Press [2] or [6] until “Config Sheet” is displayed.
3. Press [4] and a printer configuration sheet is printed.
Menu Map
The menu map helps the user/technician navigate the multitudes of menus and
sub-menus available. It is a good idea to print a menu map and keep it close to the
printer for reference by users, technicians, and/or system administrators.
1. From the “Ready” menu, press [1] or [5] until “Print Menu” is displayed.
2. Press [2] or [6] until “Menu Map” is displayed.
3. Press [4] and the menu map is printed.
s5400-345