Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 4 / 503

Phaser 5400 Laser Printer Service Guide iii
Users Safety Summary
Terms in manual: Various terms are used throughout this manual to either provide
additional information on a specific topic or to warn of possible danger that might be
present during a procedure or action. Be aware of all symbols and terms when they are
used, and always read
Note
,
Caution
and
Warning
messages.
Terms on Product:
Power Source: For 110 VAC printers, do not apply more than 130 VAC RMS between
the supply conductors or between either supply conductor and ground. Use only the
specified power cord and connector. For 220 VAC printers, do not apply more than 250
VAC RMS between the supply conductors or between either supply conductor and
ground. Use only the specified power cord and connector. Refer to a qualified service
technician for changes to the cord or connector.
Warning: If the product loses the ground connection, usage of knobs
and controls (and other conductive parts) can cause an
electrical shock.
Note:
A
Note
may indicate an operating or maintenance procedure,
practice or condition that is necessary to efficiently accomplish a
task.
A
Note
may also provide additional information related to a
specific subject or add a comment on the results achieved through
a previous action.
Caution:
A
Caution
indicates an operating or maintenance procedure,
practice or condition that, if not strictly observed, could result in
damage to, or destruction of, equipment.
Warning:
A
Warning
indicates an operating, or maintenance procedure,
practice or condition that, if not strictly observed, could result in
injury or loss of life.
Caution: A personal injury hazard exists that may not be apparent. For
example, a panel may cover the hazardous area.
Danger: A personal injury hazard exists in the area where you see the sign.