Xerox 5400N - Phaser B/W Laser Printer, Service Quick Reference Manual

Page: 240 / 503

Phaser 5400 Laser Printer Service Guide 211
5 PAPER PATH INSPECTION
Inspect the paper path between the feed tray and the
exit tray for contamination or obstructions.
Is the paper path free of obstructions and
contamination?
Go to
Step 6. Remove
obstructions
or
contamination
from the
paper path.
6 ROLLER INSPECTION
Inspect all of the roller along the paper path, between
the feed tray and the exit tray, for contamination, wear
or damage.
Are the paper path roller free of contamination,
wear or damage?
Go to
Step 7. Replace the
damaged or
contaminated
roller.
7 PRINT CARTRIDGE REPLACEMENT
1. Install a new Print Cartridge.
2. Run a Test Print.
Is the print still damaged?
Go to
Step 8. Problem
solved.
8
SUSPECT COMPONENTS
The following printer components and areas are
associated with this specific problem. One or more of
these components or areas may have failed partially or
completely. If you cannot isolate this problem using the
steps in this Repair Analysis Procedure, replace each
component or troubleshoot each area listed below, one
at a time, until you isolate and solve the problem.
■
Fuser Assembly [RRP 5.1, page 288 ]
■
Paper Transport Assembly [RRP 4.1, page 283 ]
■
BTR Assembly [RRP 7.6, page page 304 ]
■
MBF Feed Roller Assembly [RRP 2.2, page 261 ]
■
Retard Holder Assembly [RRP 2-5]
■
Rear Chute Assembly [RRP 3.1, page 273 ]
■
Turn Roller Assembly [RRP 2-4]
■
Feed Roller [RRP 2.10, page 271 ]
■
Tray Assembly [PL 2.1 / PL 2.2]
Table 114 Damaged Print Troubleshooting Procedure (cont'd.)
Step Actions and Questions Yes No