WAGO-ETHERNET-Zubehör 852 Configuring in the Web-Based Management System (WBM) 255
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Manual
1.1.0
Table 111: WBM “System Log” Page
Syslog Server Settings
Parameters
Default
Description
Server IP
IPv4
In the “IPv4” selection box, choose if you want to
select this version of the Internet protocol.
IPv6
In the “IPv6” selection box, choose if you want to
select this version of the Internet protocol.
Enter the IP address in decimal-point notation. (e.g.,
192.168.1.1).
Disable
Select “Disable” in the selection box to prevent the
switch from sending all new log messages to the
Syslog server.
Enable
Select “Enable” in the selection box to allow the
switch to send all new log messages to the Syslog
server.
Facility
(1) User-level
messages
Select “(1) User-level messages” in the selection box
if you want to display user-specific messages.
(5) Messages
generated
internally by
syslogd
Select “(5) Messages generated internally by
syslogd” in the selection box if you want to display
messages generated by syslog internally.
(14) Log alert
(16) Local use 0
(17) Local use 1
(18) Local use 2
(19) Local use 3
(20) Local use 4
(21) Local use 5
(22) Local use 6
(23) Local use 7
System Log
Parameters
Default
Description
Log Level
All
Select “All” in the selection box if you want to
display all log messages.
1:Alert
Select “Log alert” in the selection box if you want to
display the log messages.
2:Critical
Select “Critical” in the selection box if you want to
display critical log messages.
3:Error
Select “Error” in the selection box if you want to
display the errors.
4:Warning
Select “Warning” in the selection box if you want to
display the warnings.
5:Notice
Select “Notice” in the selection box if you want to
display the notices.
6:Informational Select “Informational” in the selection box if you
want to display all information.
