WAGO-ETHERNET-Zubehör 852 Configuring in the Web-Based Management System (WBM) 115
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Manual
1.1.0
Pos: 28.8.1 /Serie 852 (ETH ERNET-Z ubehör)/Konfigurieren/WBM Einlei tung @ 25\mod_1455006375840_21.docx @ 200388 @ 1 @ 1
Admi n
9
Configuring in the Web-Based Management
System (WBM)
An internal file system and integrated Webserver can be used for configuration
and administration of the system. Together, they are referred to as the Web-Based
Management System (WBM).
The HTML pages saved internally provide you with information about the
configuration and status of the fieldbus node. In addition, you can also change the
configuration of the device here.
You can also save HTML pages created yourself via the implemented file system.
Always restart after making changes to the configuration!
The system must always be restarted for the changed configuration settings to
take effect.
1.
To open the WBM, launch a Web browser (e.g., Microsoft Internet Explorer
or Mozilla Firefox).
2.
Enter the IP address of the fieldbus coupler/
controller.
3.
Click
[Enter]
to confirm.
4.
Enter your user name and password in the query dialog:
Firmware version 01:
User = “admin”, password = “Wago1951”
Firmware version 02:
User = “admin”, password = “wago”
5.
The start page of WBM loads.
6.
Make the wanted settings.
7.
Press
[Apply]
or
[Update]
or press
[Delete]
or
[Discard]
to discard your
changes.
8.
To apply the settings, press the
[Save configuration]
button to confirm your
changes.
