WAGO-ETHERNET-Zubehör 852 Configuring in the Web-Based Management System (WBM) 241
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Manual
1.1.0
Table 105: WBM “Traffic Monitor” Page
Traffic Monitor Settings
Parameters
Default
Description
Status
Disable
Select “Switch OFF” in the selection box to disable
the “Traffic Monitor” function globally.
Enable
Select “Switch ON” in the selection box to enable
the “Traffic Monitor” function globally.
Port
From:
1
Select a port or port range in the selection box that
you want to configure.
To:
1
Select a port or port range in the selection box that
you want to configure.
State
Disable
Select “Switch OFF” in the selection box if you want
to disable the “Traffic Monitor” function for the port
or port range.
Enable
Select “Switch ON” in the selection box if you want
to enable the “Traffic Monitor” function for the port
or port range.
Action
None
Select “None” in the selection box if you do not
want to cancel port blocking.
Unblock
Select “Unblock” in the selection box if you want to
cancel port blocking.
Packet Type
Broadcast
Select “Broadcast” in the selection box, if you want
to monitor this as the packet type.
Multicast
Select “Multicast” in the selection box, if you want
to monitor this as the packet type.
Bcast+Mcast
Select “Bcast+Mcast” in the selection box, if you
want to monitor both as the packet types.
Packet Rate (pps)
In the input field, enter the packet rate that you want
to monitor.
Recovery State
Enable
Select “Switch ON” in the selection box if you want
to enable the “Recover” function in the “Traffic
Monitor” for the port or port range.
Disable
Select “Switch OFF” in the selection box if you want
to disable the “Recovery” function in the “Traffic
Monitor” for the port or port range.
Recovery Time (min)
1
… 60
Enter a value in the input field for the “Recovery
Time” for the “Traffic Monitor” function.
Traffic Monitor Status
Parameters
Default
Description
Port
1 … 10
This column displays the port numbers.
State
Disable
Enable
This column displays the status of the specific port.
Status
Normal
This column displays the status of the operational
state.
Packet Type
Broadcast
Multicast
Bcast+Mcast
This column displays the type of data packet.
Packet Rate (pps)
This column displays the selected packet rate.
Recovery State
Enable
Disable
This column displays the status of the selection
Recover function.
Recovery Time (min)
1 … 60
This column displays the selected Recovery time.
Pos: 28.8.8 /Serie 852 (ETH ERNET-Z ubehör)/Konfigurieren/M anagement 852- 0303 @ 27\mod_1468318199599_21.docx @ 216542 @ 234554533344433 @ 1
