WAGO-ETHERNET-Zubehör 852 Configuring in the Web-Based Management System (WBM) 173
852-1305 8/4-Port 100BASE-T/1000BASE-SX/LX
Manual
1.1.0
9.3.3.6.2 Port-based Q-in-Q
Figure 64: WBM “Q-in-Q” Page – “Port-based Q-in-Q” Tab
Table 68: WBM “Q-in-Q” Page – “Port-based Q-in-Q” Tab
Port-based Q-in-Q
Parameters
Default
Description
Port
From:
1
Select a port or port range in the selection box to
configure the “Q-in-Q”.
To:
1
Select a port or port range in the selection box to
configure the “Q-in-Q”.
Role
Normal
Select “Normal” in the selection box to select this
role for the specific port.
Access
Select “Access” in the selection box to select this
role for the specific port.
Tunnel
Select “Tunnel” in the selection box to select this
role for the specific port.
SPVID (1~4094)
1
Enter the service provider VLAN “SPVID” in the
input field.
Priority
0
Select the respective priority for the specific port in
the selection box.
0 = Lowest priority
7 = Highest priority
Port-based Q-in-Q Status
Parameters
Default
Description
Port
1 … 10
This column displays the port number.
Role
This column displays the role of the specific port.
SPVID
1 … 10
This column displays the SPVID.
Priority
This column displays the priority for the specific
port.
