VD300 Series Inverter User Manual
Operation and Display
- 41 -
7) During self-learning process to press STOP/RESET to stop self-learning. Note the start/stop of
self-learning can only be operated by keypad. After self-learning, the function code recover to 0.
4.3 Password Setting
The VD300 series inverter provides user password protection function. When P29.00 is set to
non-zero value, it indicates the user password, and the password protection turns Enabled after
exiting the function code editing status. When pressing MENU/ESC key again enter function code to
view/edit state, “0.0.0.0.0.” will be displayed, and common menu cannot be entered until user
password is input correctly.
4.4 Parameter Lock (authority lower than password)
VD300 series inverter provide user parameter lock protection, when P00.21 is 1, lock is effective, if
P00.21 is 2, just not allow to modify P29.01. Without setting user password, it can protect user
parameter or prevent user get parameter initialized.
Summary of Contents for VD300 Series
Page 2: ......
