Parameter Description
VD300 Series Inverter User Manual
- 112 -
ON
OFF
ON
ON
MS speed 11
P11.11
ON
ON
OFF
OFF
MS speed 12
P11.12
ON
ON
OFF
ON
MS speed 13
P11.13
ON
ON
ON
OFF
MS speed 14
P11.14
ON
ON
ON
ON
MS speed 15
P11.15
4 MS speed command terminals can be combined into 16 kinds of status, which corresponding to 16
command set value, as shown in table 1. Multistage speed instruction can be as a given source for
PID, in addition to the MS function to meet the needs of switching between different given values.
When frequency source is choosing as multi-stage speed, the 100.0% of function code P11.00 ~
P11.15 corresponding with max output frequency P00.07.
When MS command source as PID given source, the 100.0% of function code P11.00~P11.15
corresponding with the 100% of PID feedback range, that is, the full range of feedback instruments.
●
In all frequency command source, the MS speed command priority is highest, when multistage
speed arbitrary terminals function is effective, multistage speed command is in priority.
Schedule 2 acceleration/deceleration time selection terminal function description
Terminals 1
Terminals 2
Acceleration/Deceleration
time selection
Corresponding Parameter
OFF
OFF
Acceleration/deceleration 0
P00.14, P00.15
OFF
ON
Acceleration/deceleration 1
P09.03, P09.04
ON
OFF
Acceleration/deceleration 2
P09.05, P09.06
ON
ON
Acceleration/deceleration 3
P09.07, P09.08
P05.10
HDI1 Terminal Function
Selection
0: HS pulse input
1: Switch signal input
0
◎
Set HDI1 terminal input property setup, default is HS pulse input function.
P05.11
Digit Input Polarity
Selection
0x000~0x1FF: bit0~bit8 corresponding
with
DI1~DI5, the binary bit set value of
DHI1, DI7~DI9 corresponding to the
function:
0: Switch closed effective
1: Switch open effective
0x000
◎
Set DI digital input terminal effective state mode.
0: When selecting switchover close effective, corresponding DI terminal connected with COM or
OPEN is effective, open is invalid;
1: When selecting switchover open effective, corresponding DI terminal connected with COM or
OPEN is invalid, open is effective;
P05.12
DI Filter Time
0.000s~1.000s
0.010s
○
It is used to set the software filter time of DI terminal status. If input terminal is easily interfered or
resulting in wrong action in some application, in order to increase anti-interference capacity, the
Summary of Contents for VD300 Series
Page 2: ......
