C2-4000 Series RGB Scaler Operation Manual
54
15.0
ADJUST BUTTONS SUB MENU
The Fourth Sub Menu is for changing the Button assignments. This was
covered in the Quick Start section of the manual and is presented again here
along with adjustment procedures for
Preset
,
Instant Program Select
and
Preview Follow
modes:
The following example shows how you would select RGB1 as the input for
button number 3. All input assignments are made using the same procedure.
To begin, press button number 3 on the Scaler so you can see the result of
your efforts.
Turn the Menu Select knob until you are parked on the following screen:
Press the Menu Select Knob once to advise the Scaler that you want to make
an adjustment to the input assignments of one of the buttons. When you do,
you’ll be rewarded with the following LCD display:
Pressing the Menu Select Knob again will cause the brackets surrounding the
number “1” to begin flashing. Turn the Menu Select knob to the right until the
number “3” appears between the flashing brackets. When it does, press the
Menu Select knob again to load the number “3” into the Scaler’s memory. The
brackets will stop flashing and display should look like this:
Rotate the Menu Select knob one detent to the right and press the knob
again. This notifies the Scaler that you are about to change the input
assignment to input number “3”. The brackets will disappear from around the
input number and will appear around the section of the display that says
“input=RGB3”. The LCD screen will look like this:
Press the knob again and the brackets will begin to flash indicating that the
Scaler is ready to accept the new input assignment. Rotate the Menu Select
knob to the left until the number “1” appears and then select it by pressing the
knob again. The flashing will cease and the LCD display will now look like the
screen shown below, indicating that the reassignment is complete. (You may
Sub menu
Adjust Buttons
Adjust Buttons
Button [ 1]= input=RGB1
Adjust Buttons
Button [ 3]= input=RGB3
Adjust Buttons
Button 3 = [input=RGB3]
Summary of Contents for C2-4000 Series
