C2-4000 Series RGB Scaler Operation Manual
22
7.1
Quick Start: Assigning Inputs to Specific Buttons
The unit has a front panel knob mechanically connected to a Rotary Encoder
that has detents you can feel as you turn the knob. The knob is located
between the LCD display and the input buttons and is labeled
“Menu Select”.
The following example shows how you would select RGB1 as the input for
button number 3. All input assignments are made using the same procedure.
To begin, press button number 3 on the Scaler so you can see the result of
your efforts. From this point on, we will be using the Front Panel LCD Display
and Menu Select Knob to make changes.
When you first turn the Scaler on, the LCD screen will show the following
display:
This is called the Banner Screen and is a sort of “Home Base” for the menu
system. You should now turn the Menu Select knob Clockwise until you are
parked on the following screen:
Press the Menu Select Knob once to advise the Scaler that you want to make
an adjustment to the input assignments of one of the buttons. When you do,
you’ll be rewarded with the following LCD display:
Pressing the Menu Select Knob again will cause the brackets surrounding the
number “1” to begin flashing. Turn the Menu Select knob to the right until the
number “3” appears between the flashing brackets. When it does, press the
Menu Select knob again to load the number “3” into the Scaler’s memory. The
brackets will stop flashing and display should look like this:
CORIO2 C2-4100
TV One
Sub menu
Adjust Buttons
Adjust Buttons
Button [ 1]= input=RGB1
Adjust Buttons
Button [ 3]= input=RGB3
Summary of Contents for C2-4000 Series
