C2-4000 Series RGB Scaler Operation Manual
34
As you learned in the Quick Start section, the way to navigate within the Menu
structure is to rotate the Menu Select knob to the area of interest and then
press the knob once. This notifies the control logic within the Scaler that you
are interested in accessing a particular area.
Similarly, when within a specific area, you use the same ‘knob rotation and
pressing’ steps to move to and select a function or parameter within the unit to
change. You then rotate the knob one way or the other to actually effect the
change and press the knob again to record your choice.
When you make your choice known with the press of the knob, that action
also allows you to move to another area entirely, repeat the same activity
within the area where you are located or back up in the selection process all
the way to the top menu. Everything done from the front panel involving the
Menu Select knob and the LCD Screen is done using this simple procedure.
Since you learned how to navigate within the menu structure in the Quick
Start section, the only remaining mysteries now are what each of the
individual selections within the top menu and various sub menus actually “do”.
Once that’s sorted out, you’ll be an expert with the RGB Scaler in no time.
10.0
THE TOP MENU
The Top Menu is the first menu level. From here, you can make several RGB
settings and also branch out to the various sub menus. Rotate the Menu
Select knob one detent to the right to progress through the Top Menus,
pressing the knob once to select the menu of interest.
10.1
Banner Screen
When you first apply power to the RGB Scaler, the LCD screen will be parked
on the Banner Screen. It will always have the same information displayed and
cannot be changed. The Banner screen will look like this:
10.2
Software and Hardware Version Screen
Turning the Menu Select knob to the right one detent will bring up a screen
that displays the Software and Hardware version numbers. When new
software is available from the support website, you should compare the
version number of the new software to the software currently installed on your
Scaler. The features of the new software version will be listed on the website
so that you can decide whether or not you wish to upgrade. Information on the
upgrade procedure, directions explaining how to register and the URL of the
website will be covered a bit later in this manual.
CORIO2 C2-4100
TV One
Summary of Contents for C2-4000 Series
