C2-4000 Series RGB Scaler Operation Manual
58
15.2
Instant Program Select
Another feature within the Adjust Buttons Sub Menu controls how the Scaler
performs its output switching. To adjust this feature, rotate the Menu Select
knob until you see the following LCD display:
If Instant Program Select is set to “On”, anytime an input button is pressed,
the program output will instantly change to the new selection. If set to “Off”,
pressing the input button will cause the image to appear on the Preview
monitor and the selected input button will begin to flash. Pressing the input
button a second time will cause the image to be switched onto the program
bus. This feature allows you to examine the image before you display it for
everyone else to see. The feature is a simple toggle so there are no flashing
brackets. Just press the Menu Select knob to switch from one mode to the
other.
15.3
Preview Follow Mode
There may be occasions where you want to set the preview feature to
continuously monitor a single input. An example would be a live camera
showing a scene that is only important when some specific event occurs. If
you could monitor the preview monitor and determine when the event was
about to occur, you could switch to it just before the event so those watching
the program display could be viewing other material until the event occurred.
The Preview Follow Mode is used for just this sort of situation.
The Preview Follow Mode screen only appears when the Instant Program
Select feature is set to “On”. If the Instant Program Select feature is set to
“On”, you will see the above screen when you rotate the Menu Select knob
one detent to the right. When the above screen appears, pressing the Menu
Select knob will toggle the feature between “On” and “Off”. When it is “Off”,
the Preview monitor will be locked on the image it is displaying and it will not
change regardless of what selections you make on the input select buttons.
For Instant Program Select and Preview Follow Mode, remember to press and
hold the Menu Select knob until you hear the “Beep” if you want your changes
to survive should the Scaler be unplugged from the AC outlet.
Adjust Buttons
Instant prog. select [ On]
Adjust Buttons
Preview follow mode [ Off]
Summary of Contents for C2-4000 Series
