C2-4000 Series RGB Scaler Operation Manual
48
13.5
H/V Shrink Position %
The adjustment was also covered in the Quick Start area of the manual.
Immediately after the Shrink Level % LCD screen, you’ll find the adjustments
that allow you to position the shrunken image somewhere other than the
center of the screen. Once you’ve arrived at the screen shown above, press
the Menu Select knob. This will cause the Brackets surrounding the left-hand
numbers to start flashing and allow you to move the image left or right.
Rotating the knob Counter-clockwise will move the image to the left and
Clockwise will move it to the right. Upon reaching the desired position, press
the knob again to load the new value into temporary memory. Rotate the knob
to the right one detent and press it again. The brackets will now surround the
right-hand number and the brackets will flash. Rotate the knob Counter-
clockwise to move the shrunken image upwards and Clockwise to move the
image downwards. Press the knob again to load the new value into temporary
memory. Remember to press and hold the knob until you hear the “Beep” if
you want to permanently save the new values.
13.6
Image Smoothing
Image smoothing reduces the jagged-edges sometimes seen within an output
image by softening them. It typically greatly improves the quality of an scaled
image. There are four possible settings for this adjustment: “Off”, “Auto”,
“Med.” and “High”. The “Auto” setting is generally thought to be most
desirable. To make a change in the amount of Image Smoothing, press the
Menu Select knob while on the LCD screen illustrated above. This will cause
the brackets to begin flashing and you may then rotate the Menu Select knob
Clockwise and Counter-clockwise until the desired choice appears. Press the
knob once again to store the new choice in temporary memory or press and
hold the knob until you hear the “Beep” to make the change permanent.
Adjust Scaler Parameters
H/V shr. pos.% [ 50] 50
Adjust Scaler Parameters
Image smoothing [High]
Summary of Contents for C2-4000 Series
