TV One C2-4000 Series, User Manual

Page: 40 / 108

C2-4000 Series RGB Scaler Operation Manual
39
11.0 SUB MENUS
There are six sub menus used in conjunction with the Top Menu:
Setup Program Source
Adjust Scaler Parameters
Adjust Lock / Overlay
Adjust Buttons
Adjust Image Parameters
System
Rotating the Menu Select knob to the right from the Banner Screen and then
pressing the knob selects one of the sub menus.
12.0 SETUP PROGRAM SOURCE SUB MENU
Rotating the knob to the right from the Banner Screen eventually takes you to
the Setup Program source screen. From here, each input parameter can be
adjusted plus the changes can be stored in non-volatile memory.
It isn’t necessary to drill down within the Setup Program source sub menu to
reach the proper grouping. As you select inputs, the Scaler displays what type
of signal you are using and presents you with the proper set of adjustment
choices for the signal. The headings that follow will show what types of
signals are adjustable for each sub menu.
Remember: you must first select
Setup Program Source from the Top Menu to be able to change any of the
following settings.
For the purpose of this manual, we are using the Factory Default settings to
explain the sub menus. If you wish to duplicate the signal input structure
shown here (the signal type shown in parentheses on the screen display
replication), please perform a factory reset.
12.1 Autoset Status
From the Setup Program Source screen, pressing the Menu Select knob will
display the first in the series of Program Source adjustment screens. This first
one is called Autoset Status and the following screen will appear when you
press the knob:
Sub menu
Setup Program source
Program Source [RGB1]
Autoset Status [ Inactive]