C2-4000 Series RGB Scaler Operation Manual
24
We’ll begin at the Banner Screen. As with the Input Assignment exercise, the
screen will look like this:
Rotate the Menu Select knob to the right until you see the Program Source
screen. In our example, we are using RGB video from a PC on the RGB1
input that happens to have 1024 X 768 60 Hz output parameters. The top line
of the display will show that resolution and refresh rate as an informational
display. The bottom line will show the current Program source. Press Button
1, making the Program Source parameter RGB1. The LCD screen therefore
will look like this:
Press the knob to notify the Scaler that you wish to change the Program
Source parameter. This will cause the Brackets surrounding the “RGB1”
portion of the display to begin flashing. When they do, use the Menu Select
knob to change the Program Source parameter to RGB2. In so doing, you will
have told the Scaler that you’re going to be using RGB2 as the image you
wish to shrink. Press the knob once to confirm the choice. The brackets will
cease flashing, the image on the Monitor will change to RGB2 and the LCD
display will look like this:
Rotate the Menu Select knob to the right and you’ll arrive at the Lock Source
screen. This is where you set your background source. In our example,
because we are operating in the Factory Default mode, RGB1 is already
selected. We’ll leave it as is for this exercise but you may want to change it to
some other background selection later when you’re making your own
selections. When you want to do that, press the Menu Select knob once and
the brackets will begin flashing. Make your selection for the background/Lock
image source and press the knob again to confirm your selection.
Note
:
The resolution of the PIP output is governed by the resolution of the
background image so if you select a low-resolution image for your background
image, the inserted image will also be low resolution. For this reason, you
should always use as high a resolution background image as possible.
CORIO2 C2-4100
TV One
1024 X 768 60Hz
Program source [RGB1]
1024 X 768 60Hz
Program source [RGB2]
1024 X 768 60Hz
Lock source [RGB1]
Summary of Contents for C2-4000 Series
