C2-4000 Series RGB Scaler Operation Manual
92
“Input” Tab
Note: Changes made using the utility are temporary unless you save the
entire setup as a custom configuration. In other words, adjustments made
here are treated the same way that control panel adjustments are treated if
you neglect to press and hold the Menu Select knob until you heard the
“Beep”.
As long as the Scaler is powered up, the changes are retained but if power is
lost or if a subsequent change is made, the change made using the utility will
be lost.
Keep this in mind and if you do need to make a change permanent either
save the configuration using the utility’s configuration save/load capability or
make the change using the Menu Select knob and save it by pressing and
holding the Knob until you hear the “Beep”. You’ll then need to press the
Read button on the utility to re-sync the utility to the Scaler.
Summary of Contents for C2-4000 Series
