C2-4000 Series RGB Scaler Operation Manual
64
17.3
Push To Store
This screen provides a quick and easy way to store all current operating
parameters. The Scaler will remember the set up you are using at the time of
data storage when you next apply power. To store the current Scaler settings,
press and release the Menu Select knob.
17.4
RS-232 Baud Rate
This menu item allows the adjustment of the serial baud rate used for RS-232
communications. Pressing the Menu Select knob will cause the brackets to
flash and the rate can be adjusted to 9600, 19200, 28800, 33600, 38800 and
57600. Press and hold the knob until you hear the “Beep” to make the change
permanent. (This adjustment is provided for those instances where you wish
to use a third party RS-232 control system. Leave the baud rate set to 57600
when using the bundled Windows controller in the RS-232 mode).
17.5
Buzzer On/Off
The screen labeled ‘Buzzer’ is actually the control for turning the “Beep” “On”
or “Off”. Normally this is left in the “On” position to provide positive feedback
that your data entries and parameter changes have been accepted. There is
also a low level audio ‘Click’ that occurs each time you rotate the Menu Select
knob. Turn the ‘Buzzer’ “Off” also turn off the detent ‘Click’ feature.
To turn the Buzzer “On” or “Off”, go to the above screen and press the Menu
Select knob. This function is a simple Toggle and there are no flashing
brackets. Just press the Menu Select knob and the ‘Buzzer’ will either be
turned “On” or “Off”.
17.6
IR Remote On/Off
The RGB Scaler can be controlled by an Infrared (IR) remote control.
Normally this function is left in the “On” state but it’s possible that you could
have some sort of interference present that would require you to disable the
function. Like the ‘Buzzer’ control this is a simple toggle with no flashing
brackets to contend with. Simply park the Scaler’s LCD screen on the above
System
Buzzer [ On]
System
IR Remote [ On]
System
RS232 baud rate [57600]
System
Push to store
Summary of Contents for C2-4000 Series
