Tuttnauer ELARA11-D, Technicial Manual

Page: 116 / 176

Page 115
10.26
Replacing the Door Handle
Caution!
Before starting, ensure that there is no pressure in the autoclave.
Allow the autoclave to cool before replacing the Door Handle.
Do not disconnect the electric power, since disconnecting the power will
lock the handle and prevent replacement of the handle.
1. Open the autoclave's door.
2. Remove the two screws holding the Door Handle Cover and slide it out
from the door. It might be tight, but it will slide
3. Remove the Door Handle by pulling it in the direction of the arrow. It
might be tight, but it will slide out of its holder.
4. Slide the new handle into position.
5. Reinstall the Door Handle Cover (see step 2).
3 1 2
www.shanghaidelan.com 021-54263653