Page 7
2
Safety Instructions
The autoclave has unique characteristics. Please read and understand this
technician manual before first operation of the autoclave.
Below are the operating instructions
– safety instructions:
1. All autoclave users must receive training in proper usage from an
experienced employee. Every new employee must undergo a training
period under an experienced employee.
2. Before use, check inside the autoclave chamber to ensure that no items
have been left from the previous cycle.
3. Load trays in such a way as to allow steam to move freely among all
items.
4. When sterilizing plastic materials, make sure that the item can withstand
sterilization temperature. Plastic that melts in the chamber is liable to
cause a great deal of damage.
5. On closing the device door, make sure it is properly locked before
activating. Verify that DOOR OPEN
symbol is replaced by the
message "System Ready".
6. Verify once again that you have chosen the appropriate sterilization
program.
7. Open the door slowly to allow steam to escape and wait 1 minute before
you remove the load.
8. When removing the trays it is recommended to use the tray handle or
wear heat resistant gloves.
9. Once a month, ensure that the safety valve is operating.
10. A certified inspector must perform a periodic pressure chamber safety
test according to the local regulations.
11. Once annually, or more frequently, effectiveness tests must be
performed, i.e., calibration and validation.
12. Make sure there are no leaks, breaks, blockages, whistles or strange
noises.
13. Perform maintenance operations as instructed. The owner of the
autoclave is responsible to perform the maintenance operations.
14. Notify the person in charge immediately of any deviation from the
normal functioning of the device.
15. Protective equipment and clothes and other safety instructions should
be implemented in accordance with local and national regulations and/or
rules!
www.shanghaidelan.com 021-54263653
Summary of Contents for ELARA11-D
