Tuttnauer ELARA11-D, Technicial Manual

Page: 17 / 176

Page 16
3.9
Utilities
Property Value
Mineral free water See table in
错误
!
未找到引用源。
Power supply * 1 phase, /230VAC ±10%, 50Hz
Recommended
circuit breaker
16A
* According to the local network.
Attention:

A switch or circuit-breaker must be included in the building installation.
This switch or circuit-breaker shall be in close proximity to the equipment,
within easy reach of the operator; and marked as the disconnecting device
for the equipment.

The electrical net must be protected with a current leakage safety relay.

The electrical network must comply with local rules or regulations.

Verify that there is an easy access to the main power switch, to the water
cut-off valve and to the current leakage safety relay.
3.10
Environment Emission Information
1. The peak sound level generated by the autoclave is 65dBa with
background noise of 48 dBa.
2. The total heat per hour transmitted by the autoclave is <200Wh.
3.11
Water Quality
Physical characteristics and contaminants levels
The distilled or mineral-free water supplied to the autoclave should have the
physical characteristics and maximum acceptable level of contaminants
indicated in the table below:
Physical Characteristics and Maximum acceptable
contaminants levels in steam for sterlizers
(According to EN 13060:2004).
Element Condensate
– allowable content
Silicium oxide. SIO2
≤0.1 mg/kg
Iron
≤0.1 mg/kg
Cadmium
≤0.005 mg/kg
Lead
≤ 0.05 mg/kg
Rest of metals except iron,
cadmium, lead
≤0.1 mg/kg
www.shanghaidelan.com 021-54263653