Tuttnauer ELARA11-D, Technicial Manual

Page: 41 / 176

Page 40
Note: To exit every screen and to return to the previous screen
(to get one level up):

move the cursor to Exit by pressing the UP or DOWN keys
and then press the Start/Stop key.
- or-

press the UP and DOWN keys simultaneously.
In the next chapter you will see how to change the required parameter as
desired.
9.2
Changing a Parameter
You have browsed through the menus and reached the parameter changing
screen as explained above. Now you can change the required parameter as
desired. To do so:
1. Enter the required value as follows:

Press the Up and Down keys to change the value of the
digit.

Press the Start/Stop key to move the cursor to the next
digit to the left.
2. When finished, press the Start/Stop key repeatedly until you
move the cursor to Set.
3. Press the Up or Down key to confirm the new value and to
exit the parameter changing screen.
www.shanghaidelan.com 021-54263653