Tuttnauer ELARA11-D, Technicial Manual

Page: 100 / 176

Page 99
6. Verify that there is no leakage.
10.8
Replacing the water filling pipe.
1. Open the autoclave cover (see 11.2).
2. To replace the water pipe (1):
2.1 Unscrew the two nuts connecting the pipe to the water tank (2).
2.2 Press the three pins in the inner side of the front panel that release
the pipe and the water filling tank (3, 4).
2.3 Replace the pipe with the new one.
10.9
Replacing the Door Cover
Caution!
Before starting, open the door first, then disconnect the instrument from the
power source and ensure that there is no pressure in the chamber or coil.
Allow the autoclave to cool before removing outer covers.
Disassembling the door cover
1. Unscrew the screws (1) that connect the door plastic cover to the door.
2
1
4
3
2
www.shanghaidelan.com 021-54263653