Tuttnauer ELARA11-D, Technicial Manual

Page: 47 / 176

Page 46
Start cycle by clock
This subdirectory enables the operator to start the cycle at the time set by this
paramter.
1. Enter the Start cycle by clock screen. The following screen will
appear:
On the Start cycle by clock screen, the ti
me is displayed in the form “HH:MM”.
The hour range is 24 hours (i.e. from "0" to "24").
Setting the time to start the cycle
1. Move the cursor to the Time field.
2. Set the required time .
Enabling the Start Cycle by Clock
1. Set the starting time .
2. Move the cursor to Enabled. Press Up or Down key to enable
starting cycle by clock.
www.shanghaidelan.com 021-54263653